Common Problems

Position:Home > EN > News > Common Problems >

Use with the knife when turning slender shaft, generating what "bamboo-shaped"

Author: admin Time:2017-10-28
Paper:Use with the knife while turning slender shaft, have a bamboo-shaped because the contact pressure with the tool holder claw support with the workpiece is too large. The correct approach is to use with the knife: Distance ⑴, claw support o...

Use with the knife while turning slender shaft, have a "bamboo-shaped" because the contact pressure with the tool holder claw support with the workpiece is too large.

The correct approach is to use with the knife:

Distance ⑴, claw support on the machined surface of the support position within the tool between 10mm.
⑵, control of cut back, the entire axial length margin on bad hair can be removed, leaving black scars and scarring.
⑶, press up, down, on the order, with the feel, hearing, visual and other methods to adjust support to the outer claw up the slightest contact, make each nail to keep the same small space, and freedom of movement.
⑷, time tracking and monitoring of exposure each support claw, and to ensure good lubrication.

Contact
Contact
We would like to hear your voice

400 phone:13902422981

Tel:0757-86690339

Fax:0757-86690339

Mobile:13902422981
售后服务:13902422981

QQ:214210961

Email:214210961@qq.com

Address:NO.1 Zibianyi Road,Tangkouwo,Shishan Town,Nanhai District,Foshan.

[Up] 
Online service

Online

Online

Online

Tel:
13902422981
WeChat

Official WeChat scan